Because this lever is in equilibrium, we know that the effort force at the blue arrow is equal to the resistance weight of the green box. For a lever that's in equilibrium, one method of calculating mechanical advantage (MA) is to divide the length of the effort arm (E_a) by the length of the resistance arm (R_a):

MA = \( \frac{E_a}{R_a} \) = \( \frac{7 ft.}{8 ft.} \) = 0.88

When a lever is in equilibrium, the torque from the effort and the resistance are equal. The equation for equilibrium is R_ad_a = R_bd_b where a and b are the two points at which effort/resistance is being applied to the lever.

In this problem, R_a and R_b are such that the lever is in equilibrium meaning that some multiple of the weight of the green box is being applied at the blue arrow. For a lever, this multiple is a function of the ratio of the distances of the box and the arrow from the fulcrum. That's why, for a lever in equilibrium, only the distances from the fulcrum are necessary to calculate mechanical advantage.

If the lever were not in equilibrium, you would first have to calculate the forces and distances necessary to put it in equilibrium and then divide E_a by R_a to get the mechanical advantage.

A second-class lever is used to increase force on an object in the same direction as the force is applied. This lever requires a smaller force to lift a larger load but the force must be applied over a greater distance. The fulcrum is placed at one end of the lever and mechanical advantage increases as the object being lifted is moved closer to the fulcrum or the length of the lever is increased. An example of a second-class lever is a wheelbarrow.

In mechanics, multiple forces are often acting on a particular object and, taken together, produce the net force acting on that object. Like force, net force is a vector quantity in that it has magnitude and direction.

A wheel and axle uses two different diameter wheels mounted to a connecting axle. Force is applied to the larger wheel and large movements of this wheel result in small movements in the smaller wheel. Because a larger movement distance is being translated to a smaller distance, force is increased with a mechanical advantage equal to the ratio of the diameters of the wheels. An example of a wheel and axle is the steering wheel of a car.

Two or more pulleys used together constitute a block and tackle which, unlike a fixed pulley, does impart mechanical advantage as a function of the number of pulleys that make up the arrangement.  So, for example, a block and tackle with three pulleys would have a mechanical advantage of three.