ASVAB Mechanical Comprehension Practice Test 977948 Results

Your Results Global Average
Questions 5 5
Correct 0 2.66
Score 0% 53%

Review

1

What is work?

60% Answer Correctly

The potential for exertion

Force per unit distance

The movement of an object by a force

Force per unit time


Solution

Work is accomplished when force is applied to an object: W = Fd where F is force in newtons (N) and d is distance in meters (m). Thus, the more force that must be applied to move an object, the more work is done and the farther an object is moved by exerting force, the more work is done. By definition, work is the displacement of an object resulting from applied force.


2

Which of the following statements about this pulley configuration is false?

48% Answer Correctly

Mechanical advantage is the number of ropes that support the resistance

Changes the direction of and multiplies the effort force

This is a block and tackle pulley configuration

Only multiplies the effort force


Solution

A block and tackle is a combination of one or more fixed pulleys and one or more movable pulleys where the fixed pulleys change the direction of the effort force and the movable pulleys multiply it. The mechanical advantage is equal to the number of times the effort force changes direction and can be increased by adding more pulley wheels to the system. An easy way to find the mechanical advantage of a block and tackle pulley system is to count the number of ropes that support the resistance.


3

A fixed pulley has a mechanical advantage of:

68% Answer Correctly

2

-1

0

1


Solution

A fixed pulley is used to change the direction of a force and does not multiply the force applied. As such, it has a mechanical advantage of one. The benefit of a fixed pulley is that it can allow the force to be applied at a more convenient angle, for example, pulling downward or horizontally to lift an object instead of upward.


4

What's the last gear in a gear train called?

38% Answer Correctly

driver gear

idler gear

output gear

driven gear


Solution

A gear train is two or more gears linked together. Gear trains are designed to increase or reduce the speed or torque outpout of a rotating system or change the direction of its output. The first gear in the chain is called the driver and the last gear in the chain the driven gear with the gears between them called idler gears.


5

If the handles of a wheelbarrow are 3 ft. from the wheel axle, what force must you exert to lift the handles if it's carrying a 270 lb. load concentrated at a point 0.5 ft. from the axle?

56% Answer Correctly

810 lbs

90 lbs

0.83 lbs

45 lbs


Solution

This problem describes a second-class lever and, for a second class lever, the effort force multiplied by the effort distance equals the resistance force multipied by the resistance distance: Fede = Frdr. Plugging in the variables from this problem yields:

Fe x 3 ft. = 270 lbs x 0.5 ft
Fe = 135 ft-lb. / 3 ft 
Fe = 45 lbs