ASVAB Mechanical Comprehension Practice Test 99850 Results

Your Results Global Average
Questions 5 5
Correct 0 3.14
Score 0% 63%

Review

1

The principle of conservation of mechanical energy states that, as long as no other forces are applied, what will remain constant as an object falls?

45% Answer Correctly

total mechanical energy

potential energy

kinetic energy

acceleration


Solution

As an object falls, its potential energy is converted into kinetic energy. The principle of conservation of mechanical energy states that, as long as no other forces are applied, total mechanical energy (PE + KE) of the object will remain constant at all points in its descent.


2

Potential energy is energy that has the potential to be converted into what?

80% Answer Correctly

 kinetic energy

heat

power

work


Solution

Potential energy is the energy of an object by virtue of its position relative to other objects. It is energy that has the potential to be converted into kinetic energy.


3

For a hydraulic system, pressure applied to the input of the system will increase the pressure in which parts of the system?

58% Answer Correctly

the portions of the system at an altitude below the input

all of these are correct

everywhere in the system

the portions of the system at an altitude above the input


Solution

Pascal's law states that a pressure change occurring anywhere in a confined incompressible fluid is transmitted throughout the fluid such that the same change occurs everywhere. For a hydraulic system, this means that a pressure applied to the input of the system will increase the pressure everywhere in the system.


4

Torque involves a perpendicular force applied to a lever arm that moves around a center of rotation. Increasing the length of the lever arm will do which of the following?

54% Answer Correctly

increase torque

increase applied force

decrease applied force

decrease torque


Solution

Torque measures force applied during rotation: τ = rF.  Torque (τ, the Greek letter tau) = the radius of the lever arm (r) multiplied by the force (F) applied. Radius is measured from the center of rotation or fulcrum to the point at which the perpendicular force is being applied. The resulting unit for torque is newton-meter (N-m) or foot-pound (ft-lb).


5 If input effort is 800 ft⋅lb, what output effort will be produced by a machine with a mechanical advantage of 2?
79% Answer Correctly
3200ft⋅lb
800ft⋅lb
0ft⋅lb
1600 ft⋅lb

Solution
Mechanical advantage is the ratio of output force to input force and tells us by how many times a machine multiplies input effort. So, a machine with a mechanical advantage of 2 will multiply an input effort of 800 ft⋅lb by 2 to produce an output effort of 1600 ft⋅lb.