| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.56 |
| Score | 0% | 71% |
Inside and outside micrometers measure inside and outside:
tolerances |
|
lengths |
|
diameters |
|
angles |
Micrometers measure the diameter of cylindrical objects. Outside micrometers measure the external diameter of cylinders and inside micrometers measure the internal diameter of the cylinder's hole.
You're replacing the hubcaps on a car. Which of the following are you most likely to use?
wooden mallet |
|
rubber mallet |
|
claw hammer |
|
ball-peen hammer |
A mallet is a hammer with a relatively large head, often made of rubber or wood. Both the size and material of the mallet head help prevent damage when striking more delicate surfaces.
Which of the following statements about drill bits is not true?
drill bits are primarily right-handed |
|
drill bit size maxes out at ½" for metalworking |
|
drill bits are primarily left-handed |
|
drill bit size maxes out at ¼" for woodworking |
Drill bits remove material to create holes. They come in a variety of sizes, maxing out at ¼" for woodworking and ½" for metalworking. The majority of drill bits are right-handed which means they cut while rotating in a clockwise direction.
Which type of screwdriver has a straight slot in the top?
slotted |
|
nut driver |
|
phillips |
|
hex |
Screwdrivers come in many different handle, shaft, and tip configurations for use in a wide variety of applications. Screwdrivers are classified by their tip which is shaped to fit a corresponding screw head. Common tips are slotted (flat) and Phillips (x-shaped).
A __________ is driven by a motor and used to shape and form edge contours.
router |
|
plane |
|
file |
|
chisel |
A router is a tool that a worker uses to rout (hollow out), shape, or contour an area in relatively hard material like wood or plastic.