ASVAB Shop Information Practice Test 172055 Results

Your Results Global Average
Questions 5 5
Correct 0 2.85
Score 0% 57%

Review

1

Which of the following saws would you use if you're cutting wood along the grain?

49% Answer Correctly

crosscut saw

hacksaw

ripsaw

back saw


Solution

The ripsaw delivers maximum efficiency at cutting with or along the grain (ripping).


2

An arc-welder creates heat using:

68% Answer Correctly

high voltage electricity

propane

oxyacetylene

natural gas


Solution

Welding is a high-temperature process that involves melting the base metals in the objects to be joined to fuse them together. A filler metal is used to provide additional material to make up a joint that, depending on the weld type, can be stronger than the base materials alone. Oxyacetylene welding is a welding process that uses a torch fueled with oxygen and acetylene gases. Electric-arc welding utlizes electric current in a safer welding process (it doesn't involve burning explosive gases) that enables a wide variety of specialized applications like stick, MIG (metal inert gas), and TIG (tungsten inert gas) welding.


3

The primary difference between a standard level and a bullseye level is which of the following?

55% Answer Correctly

a standard level can measure across two dimensions

a bullseye level can measure across two dimensions

a bullseye level has only one bubble to center

a standard level has only one bubble to center


Solution

Levels utlize a fluid-filled tube containing a bubble that is centered when the surface is horizontal (level) or vertical (plumb) along the direction of the tube. While a standard level can measure along a single dimension, a bullseye level is circular and can indicate the levelness of a two dimensional plane.


4

This tool is a(n) __________.

57% Answer Correctly

inside caliper

vernier caliper

outside caliper

inside micrometer


Solution

Calipers are similar to micrometers in shape but instead of measuring distances, calipers are used to transfer distances between objects. An outside caliper is used to transfer outside dimensions while an inside caliper is used to transfer inside distances. A vernier caliper is an extremely precise caliper (down to \({1 \over 1000}\) inch) that allows measuring / transferring either inside or outside dimensions.


5

Which of the following statements about solding is not true?

56% Answer Correctly

flux is used to clean surfaces before soldering

solder has a comparatively low melting point

soldering can only join metals

solder is an alloy of lead and tin


Solution

Soldering is a process by which two or more items (typically metal) are joined together by melting a filler metal (solder) into the joint. An electrically powered soldering iron or soldering gun is used to melt the solder which is an alloy of lead and tin that has a melting point below the melting point of the items being joined. A chemical cleaning agent called flux is also used to clean the surfaces before soldering.