| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.84 |
| Score | 0% | 77% |
These tools are called:
planes |
|
chisels |
|
files |
|
rasps |
Wood chisels are used to shape or smooth wood surfaces. They come in a variety of widths and can be used with hand power or tapped with a mallet when deeper cuts need to be made.
Screwdrivers are most broadly classified by their:
width |
|
length |
|
tip |
|
torque |
Screwdrivers come in many different handle, shaft, and tip configurations for use in a wide variety of applications. Screwdrivers are classified by their tip which is shaped to fit a corresponding screw head. Common tips are slotted (flat) and Phillips (x-shaped).
When cutting hard metals with a hacksaw you should choose a blade with __________ teeth per inch (TPI).
high |
|
even |
|
low |
|
odd |
Blades with more and smaller teeth (high TPI) cut harder metals more effectively while blades with fewer and larger teeth (low TPI) cut softer metals more effectively.
Which type of screwdriver has a x-shaped indentation on the head?
slotted |
|
nut driver |
|
phillips |
|
hex |
Screwdrivers come in many different handle, shaft, and tip configurations for use in a wide variety of applications. Screwdrivers are classified by their tip which is shaped to fit a corresponding screw head. Common tips are slotted (flat) and Phillips (x-shaped).
The primary difference between a claw and a ball-peen hammer is which of the following?
their size |
|
their striking end |
|
their non-striking end |
|
their handle shape |
The most common striking tool is the hammer and the most common variety of hammer is the claw hammer. The claw hammer has two ends, one to drive nails and one to remove nails. Ball-peen hammers replace the claw with a rounded end that's used to round off the edges of metal pins and make gaskets.