| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.79 |
| Score | 0% | 76% |
These tools are called:
planes |
|
chisels |
|
files |
|
rasps |
Wood chisels are used to shape or smooth wood surfaces. They come in a variety of widths and can be used with hand power or tapped with a mallet when deeper cuts need to be made.
Which of the following would be used to make a drilling guide mark in a sheet of metal?
chisel |
|
center punch |
|
screwdriver |
|
pin punch |
A punch is narrow and is used to drive objects like nails (pin punch) or for making guide marks for drilling (center punch) or patterns in wood or metal.
Which of the following statements about an 8-point saw is not true?
an 8-point saw makes a rougher cut than a 6-point saw |
|
an 8-point saw makes a finer cut than a 12-point saw |
|
an 8-point saw makes a rougher cut than a 12-point saw |
|
an 8-point saw has eight teeth per inch |
Saw blades are described by the number of teeth per inch (TPI). The higher the TPI of a saw the finer the cut it will make.
This tool is a(n) __________.
punch |
|
chisel |
|
lever |
|
screwdriver |
A chisel has a long sharp edge and is used, often in conjunction with a hammer, for cutting. In woodworking, chisels are used to remove large sections of wood to create the initial shape of a design. In metalworking, chisels are used to remove waste metal when a smooth finish is not required.
You need to secure two pieces of wood together while the glue between the dries. Which of the following tools is most appropriate?
clamp |
|
rubber band |
|
pincers |
|
pliers |
A clamp applies pressure to prevent two objects from moving relative to each other, for example, to keep to pieces of wood together while the glue between the dries. A clamp is commonly made of metal and shaped like the letter C with a perpendicular flat-edged plate providing variable pressure between it and the top of the C as a screw to which it is attached is tightened and released.