| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.43 |
| Score | 0% | 69% |
Which of the following saws would you use if you're cutting wood along the grain?
back saw |
|
crosscut saw |
|
hacksaw |
|
ripsaw |
The ripsaw delivers maximum efficiency at cutting with or along the grain (ripping).
You're creating a tube out of a sheet of metal. What type of fastener are you likely to use?
punch |
|
nail |
|
rivet |
|
glue |
A nail is a short pin-shaped shaft of steel that's typically used to fasten pieces of wood together. It has a flat head on one end and a point on the other. A rivet consists of a cylindrical shaft with a head on one end and a tail on the other. When the rivet is installed, the tail is expanded and reshaped to form another head, creating a dumbell shape that will hold two surfaces together semi-permanently.
When compared to drilling, boring makes __________ holes.
rougher |
|
smoother |
|
smaller |
|
larger |
Drilling is the process of making small holes in wood or metal while boring is the process of making larger holes.
Inside and outside micrometers measure inside and outside:
lengths |
|
tolerances |
|
angles |
|
diameters |
Micrometers measure the diameter of cylindrical objects. Outside micrometers measure the external diameter of cylinders and inside micrometers measure the internal diameter of the cylinder's hole.
A __________ is driven by a motor and used to shape and form edge contours.
router |
|
plane |
|
chisel |
|
file |
A router is a tool that a worker uses to rout (hollow out), shape, or contour an area in relatively hard material like wood or plastic.