ASVAB Shop Information Practice Test 303254 Results

Your Results Global Average
Questions 5 5
Correct 0 3.25
Score 0% 65%

Review

1

A joint created by welding is __________ the original metal.

70% Answer Correctly

harmful to

as strong or slightly weaker than

as strong or stronger than

weaker than


Solution

The joint created by welding is as strong or stronger than the original metal.


2

Which of the following is not an aspect of the mechanical advantage of pliers?

60% Answer Correctly

amplify hand grip force

provide precision for manipulating small objects

change the direction of hand grip force

focus hand grip force


Solution

Pliers are designed to provide a mechanical advantage, allowing the force of the hand's grip to be amplified and focused with precision. Pliers also allow finer control over objects that are too small to be manipulated by the fingers alone. The standard configuration is combination pliers which provide a fixed maximum jaw width. Other styles include adjustable joint pliers that allow selecting jaw width, needle nose pliers for holding small objects in tight spaces and locking pliers that will lock in place to hold or clamp objects together.


3

Which of the following statements about drill bits is not true?

68% Answer Correctly

drill bit size maxes out at ¼" for woodworking

drill bits are primarily left-handed

drill bit size maxes out at ½" for metalworking

drill bits are primarily right-handed


Solution

Drill bits remove material to create holes. They come in a variety of sizes, maxing out at ¼" for woodworking and ½" for metalworking. The majority of drill bits are right-handed which means they cut while rotating in a clockwise direction.


4

Which type of screwdriver has a straight slot in the top?

70% Answer Correctly

slotted

phillips

nut driver

hex


Solution

Screwdrivers come in many different handle, shaft, and tip configurations for use in a wide variety of applications. Screwdrivers are classified by their tip which is shaped to fit a corresponding screw head. Common tips are slotted (flat) and Phillips (x-shaped).


5

Which of these saws is used with a miter box?

56% Answer Correctly

rip saw

back saw

hacksaw

crosscut saw


Solution

A miter box utlizes a back saw (a fine toothed saw with a rigid strip of steel opposite its blade edge) to make cuts in wood at a specified angle.