ASVAB Shop Information Practice Test 316928 Results

Your Results Global Average
Questions 5 5
Correct 0 3.56
Score 0% 71%

Review

1

You need to secure two pieces of wood together while the glue between the dries. Which of the following tools is most appropriate?

88% Answer Correctly

rubber band

clamp

pliers

pincers


Solution

A clamp applies pressure to prevent two objects from moving relative to each other, for example, to keep to pieces of wood together while the glue between the dries. A clamp is commonly made of metal and shaped like the letter C with a perpendicular flat-edged plate providing variable pressure between it and the top of the C as a screw to which it is attached is tightened and released.


2

This tool is a(n) __________.

66% Answer Correctly

punch

screwdriver

awl

chisel


Solution

A punch is narrow and is used to drive objects like nails (pin punch) or for making guide marks for drilling (center punch) or patterns in wood or metal.


3

Which type of screwdriver has a x-shaped indentation on the head?

83% Answer Correctly

slotted

phillips

hex

nut driver


Solution

Screwdrivers come in many different handle, shaft, and tip configurations for use in a wide variety of applications. Screwdrivers are classified by their tip which is shaped to fit a corresponding screw head. Common tips are slotted (flat) and Phillips (x-shaped).


4

This tool is a(n) __________.

57% Answer Correctly

inside caliper

inside micrometer

outside caliper

vernier caliper


Solution

Calipers are similar to micrometers in shape but instead of measuring distances, calipers are used to transfer distances between objects. An outside caliper is used to transfer outside dimensions while an inside caliper is used to transfer inside distances. A vernier caliper is an extremely precise caliper (down to \({1 \over 1000}\) inch) that allows measuring / transferring either inside or outside dimensions.


5

This tool is a(n) __________.

61% Answer Correctly

adjustable wrench

box-end wrench

combination wrench

open-end wrench


Solution

Wrenches are used to provide grip and mechanical advantage by applying torque to turn objects (or to keep them from turning). The longer the wrench, the more torque that can be applied. Wrench ends are available in two primary types, open-end and box-end. A box-end wrench encloses the bolt head and is useful when more torque is needed or to maintain contact in difficult to reach locations. An open-end wrench is designed for speedily loosening easier to reach fasteners. Wrenches that feature one open and one box end are called combination wrenches and adjustable wrenches feature an open end with an adjustable width.