| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.27 |
| Score | 0% | 65% |
You're constructing a cabinet in your workshop and one of the cabinet doors is slightly too big. Which of the following tools would you use to make it fit?
chisel |
|
drill |
|
file |
|
plane |
In wooodworking, a plane is used to shave off a small amount of material to smooth a surface or make it fit properly. A jack plane is a general purpose plane that contains an adjustable depth blade set at an angle with a handle and knob to allow gripping when sliding the plane across wood.
You're replacing the hubcaps on a car. Which of the following are you most likely to use?
wooden mallet |
|
claw hammer |
|
rubber mallet |
|
ball-peen hammer |
A mallet is a hammer with a relatively large head, often made of rubber or wood. Both the size and material of the mallet head help prevent damage when striking more delicate surfaces.
When using a hacksaw, blades with __________ teeth are more appropriate for cutting thinner materials.
more |
|
less |
|
wider |
|
thinner |
A hacksaw has replaceable blades and is used to cut metal. The blade type is chosen based on the material that is to be cut. Blades with larger numbers of teeth per inch are more appropriate for cutting thinner materials.
You're creating a tube out of a sheet of metal. What type of fastener are you likely to use?
rivet |
|
punch |
|
nail |
|
glue |
A nail is a short pin-shaped shaft of steel that's typically used to fasten pieces of wood together. It has a flat head on one end and a point on the other. A rivet consists of a cylindrical shaft with a head on one end and a tail on the other. When the rivet is installed, the tail is expanded and reshaped to form another head, creating a dumbell shape that will hold two surfaces together semi-permanently.
Which of the following statemements about chucks is not true?
a chuck's size indicates the largest circumference drill bit that will fit |
|
a chuck is tightened and loosened using a chuck key |
|
a chuck's size indicates the largest diameter drill bit that will fit |
|
electric drills utilize a chuck to hold the drill bit |
Electric drills utilize a chuck to hold the drill bit. A chuck's size indicates the largest diameter drill bit that will fit. A chuck is tightened and loosened using a chuck key.