ASVAB Shop Information Practice Test 598348 Results

Your Results Global Average
Questions 5 5
Correct 0 3.08
Score 0% 62%

Review

1

This tool is a(n) __________.

61% Answer Correctly

open-end wrench

box-end wrench

combination wrench

adjustable wrench


Solution

Wrenches are used to provide grip and mechanical advantage by applying torque to turn objects (or to keep them from turning). The longer the wrench, the more torque that can be applied. Wrench ends are available in two primary types, open-end and box-end. A box-end wrench encloses the bolt head and is useful when more torque is needed or to maintain contact in difficult to reach locations. An open-end wrench is designed for speedily loosening easier to reach fasteners. Wrenches that feature one open and one box end are called combination wrenches and adjustable wrenches feature an open end with an adjustable width.


2

Which of the following is not an advantage of using a tape measure over using a ruler?

54% Answer Correctly

measure with more accuracy

measure longer distances

easier storage

measure in tighter spaces


Solution

Rulers are used to both measure distance and to draw straight lines. Tape measures are flexible rulers useful for measuring longer distances and in tighter spaces. Rulers and tape measures provide similarly accurate measurements.


3

When cutting hard metals with a hacksaw you should choose a blade with __________ teeth per inch (TPI).

63% Answer Correctly

odd

even

high

low


Solution

Blades with more and smaller teeth (high TPI) cut harder metals more effectively while blades with fewer and larger teeth (low TPI) cut softer metals more effectively.


4

A welding rod provides:

70% Answer Correctly

protection for the welder

stability for the welding torch

the joining material for a weld

fuel for the welding torch


Solution

The joining material for a weld is called a welding or filler rod and is available in a variety of diameters and alloys for different welding tasks.


5

Which of the following is not a common pliers configuration?

61% Answer Correctly

wire

needle nose

locking

adjustable joint


Solution

Pliers are designed to provide a mechanical advantage, allowing the force of the hand's grip to be amplified and focused with precision. Pliers also allow finer control over objects that are too small to be manipulated by the fingers alone. The standard configuration is combination pliers which provide a fixed maximum jaw width. Other styles include adjustable joint pliers that allow selecting jaw width, needle nose pliers for holding small objects in tight spaces and locking pliers that will lock in place to hold or clamp objects together.