| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.10 |
| Score | 0% | 62% |
Which of the following determines whether a socket can be used with a particular ratchet?
the socket size |
|
the point size |
|
the drive size |
|
the drive circumference |
A ratchet (or socket wrench) is a wrench that applies torque in only one direction with a handle that can be moved back and forth without losing contact with the fastener. A ratchet uses variable attachments called sockets which come in a variety of drive sizes based on the size of the opening that attaches to the ratchet. Sockets with the same drive size will vary in the shape (six-point, twelve-point) and size of the nut opening that attaches to the fastener being tightened or loosened. Smaller point sized sockets are stronger and can apply greater torque while larger point sizes allow easier alignment.
What is a framing square used for?
measuring length around corners |
|
measuring thickness and irregular shapes |
|
ensuring that surfaces are level |
|
marking lines at a right angle |
Rulers are used to both measure distance and to draw straight lines. Tape measures are flexible rulers made from cloth or metal and are useful for measuring longer distances and in tighter spaces. Both rulers and tape measures provide similar accuracy, commonly down to \({1 \over 16}\) or \({1 \over 32}\) inch. A steel framing square is made up of a shorter ruler (tongue) and a longer ruler (blade) that meet at a 90° (right) angle. A framing square is often used by carpenters when framing stairs and roofs.
A joint created by soldering is:
weaker than a weld |
|
stronger than a weld |
|
as strong as the original metal |
|
as strong as a weld |
A joint created by soldering is not as strong as a weld and not as strong as the original metal.
These tools are called:
rasps |
|
planes |
|
files |
|
chisels |
Wood chisels are used to shape or smooth wood surfaces. They come in a variety of widths and can be used with hand power or tapped with a mallet when deeper cuts need to be made.
The __________ is an initial shallow saw cut made as a guide to prevent the saw from slipping sideways on subsequent more powerful cuts.
guide |
|
channel |
|
kerf |
|
groove |
When you start sawing by creating a kerf it will help prevent the saw from slipping sideways when you begin the power strokes that do most of the cutting.