ASVAB Shop Information Practice Test 648792 Results

Your Results Global Average
Questions 5 5
Correct 0 3.15
Score 0% 63%

Review

1

This tool is a(n) __________.

49% Answer Correctly

outside micrometer

inside micrometer

inside caliper

outside caliper


Solution

Micrometers provide accuracy to the thousandths of an inch and come in outside and inside varieties. An outside micrometer is used to measure outside thickness, such as the diameter of a bolt, while an inside micrometer is used to measure the inside dimension of an object, such as the diameter of the hole of a nut or the width of a channel.


2

Which of the following statements about solding is not true?

56% Answer Correctly

flux is used to clean surfaces before soldering

solder has a comparatively low melting point

solder is an alloy of lead and tin

soldering can only join metals


Solution

Soldering is a process by which two or more items (typically metal) are joined together by melting a filler metal (solder) into the joint. An electrically powered soldering iron or soldering gun is used to melt the solder which is an alloy of lead and tin that has a melting point below the melting point of the items being joined. A chemical cleaning agent called flux is also used to clean the surfaces before soldering.


3

You're creating a tube out of a sheet of metal. What type of fastener are you likely to use?

76% Answer Correctly

glue

nail

punch

rivet


Solution

A nail is a short pin-shaped shaft of steel that's typically used to fasten pieces of wood together. It has a flat head on one end and a point on the other. A rivet consists of a cylindrical shaft with a head on one end and a tail on the other. When the rivet is installed, the tail is expanded and reshaped to form another head, creating a dumbell shape that will hold two surfaces together semi-permanently.


4

Which of the following saws would you use if you're cutting wood along the grain?

49% Answer Correctly

back saw

crosscut saw

ripsaw

hacksaw


Solution

The ripsaw delivers maximum efficiency at cutting with or along the grain (ripping).


5

Which of the following tools are you more likely to use when woodworking?

85% Answer Correctly

wrench

punch

chisel

rivet


Solution

A chisel has a long sharp edge and is used, often in conjunction with a hammer, for cutting. In woodworking, chisels are used to remove large sections of wood to create the initial shape of a design. In metalworking, chisels are used to remove waste metal when a smooth finish is not required.