ASVAB Shop Information Practice Test 664436 Results

Your Results Global Average
Questions 5 5
Correct 0 3.46
Score 0% 69%

Review

1

Screwdrivers are most broadly classified by their:

91% Answer Correctly

tip

width

torque

length


Solution

Screwdrivers come in many different handle, shaft, and tip configurations for use in a wide variety of applications. Screwdrivers are classified by their tip which is shaped to fit a corresponding screw head. Common tips are slotted (flat) and Phillips (x-shaped).


2

The primary difference between a standard level and a bullseye level is which of the following?

55% Answer Correctly

a bullseye level can measure across two dimensions

a standard level has only one bubble to center

a standard level can measure across two dimensions

a bullseye level has only one bubble to center


Solution

Levels utlize a fluid-filled tube containing a bubble that is centered when the surface is horizontal (level) or vertical (plumb) along the direction of the tube. While a standard level can measure along a single dimension, a bullseye level is circular and can indicate the levelness of a two dimensional plane.


3

This tool is a(n) __________.

60% Answer Correctly

vernier caliper

outside micrometer

inside caliper

outside caliper


Solution

Calipers are similar to micrometers in shape but instead of measuring distances, calipers are used to transfer distances between objects. An outside caliper is used to transfer outside dimensions while an inside caliper is used to transfer inside distances. A vernier caliper is an extremely precise caliper (down to \({1 \over 1000}\) inch) that allows measuring / transferring either inside or outside dimensions.


4

This tool is a(n) __________.

84% Answer Correctly

adjustable wrench

box-end wrench

combination wrench

open-end wrench


Solution

Wrenches are used to provide grip and mechanical advantage by applying torque to turn objects (or to keep them from turning). The longer the wrench, the more torque that can be applied. Wrench ends are available in two primary types, open-end and box-end. A box-end wrench encloses the bolt head and is useful when more torque is needed or to maintain contact in difficult to reach locations. An open-end wrench is designed for speedily loosening easier to reach fasteners. Wrenches that feature one open and one box end are called combination wrenches and adjustable wrenches feature an open end with an adjustable width.


5

Which of the following saws would you use if you're cutting wood across the grain?

61% Answer Correctly

back saw

crosscut saw

ripsaw

hacksaw


Solution

Wood saws are categorized by their teeth shape and the number of teeth per inch (TPI). The higher the TPI of a saw the finer the cut it will make. Crosscut saws utilize knife-shaped teeth that cut across the grain of the wood while rip saws cut with the grain using chisel-shaped teeth that rip the wood cells apart as the cut is made. The kerf (slot) made by by a crosscut saw is much smoother than that made by a rip saw but a rip saw cuts much faster. Coping saws are a type of bow saw used to make detailed often curving cuts using replaceable blades with fine small teeth.