| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 2.92 |
| Score | 0% | 58% |
Which of the following statements about an 8-point saw is not true?
an 8-point saw has eight teeth per inch |
|
an 8-point saw makes a rougher cut than a 6-point saw |
|
an 8-point saw makes a rougher cut than a 12-point saw |
|
an 8-point saw makes a finer cut than a 12-point saw |
Saw blades are described by the number of teeth per inch (TPI). The higher the TPI of a saw the finer the cut it will make.
Which of the following nuts prevent loosening via nylon in their threads?
cotter |
|
lock |
|
slotted |
|
wing |
Wrenches are used with threaded fasteners like bolts and nuts. A bolt has external threads while a nut has internal threads and this thread pattern combination allows them to lock together and act as fasteners. Nuts come in a variety of configurations including wing nuts which provide appendages that allow tightening and loosening by hand, slotted nuts that use a cotter pin to lock the nut in place and prevent it from loosening, and lock nuts that also prevent loosening via nylon in their threads. Threads are identified by pitch which is the number of threads per inch.
Which of the following is not a common pliers configuration?
needle nose |
|
locking |
|
wire |
|
adjustable joint |
Pliers are designed to provide a mechanical advantage, allowing the force of the hand's grip to be amplified and focused with precision. Pliers also allow finer control over objects that are too small to be manipulated by the fingers alone. The standard configuration is combination pliers which provide a fixed maximum jaw width. Other styles include adjustable joint pliers that allow selecting jaw width, needle nose pliers for holding small objects in tight spaces and locking pliers that will lock in place to hold or clamp objects together.
Which of the following saws would you use if you're cutting wood across the grain?
ripsaw |
|
hacksaw |
|
back saw |
|
crosscut saw |
Wood saws are categorized by their teeth shape and the number of teeth per inch (TPI). The higher the TPI of a saw the finer the cut it will make. Crosscut saws utilize knife-shaped teeth that cut across the grain of the wood while rip saws cut with the grain using chisel-shaped teeth that rip the wood cells apart as the cut is made. The kerf (slot) made by by a crosscut saw is much smoother than that made by a rip saw but a rip saw cuts much faster. Coping saws are a type of bow saw used to make detailed often curving cuts using replaceable blades with fine small teeth.
Which of the following is not an aspect of the mechanical advantage of pliers?
provide precision for manipulating small objects |
|
amplify hand grip force |
|
change the direction of hand grip force |
|
focus hand grip force |
Pliers are designed to provide a mechanical advantage, allowing the force of the hand's grip to be amplified and focused with precision. Pliers also allow finer control over objects that are too small to be manipulated by the fingers alone. The standard configuration is combination pliers which provide a fixed maximum jaw width. Other styles include adjustable joint pliers that allow selecting jaw width, needle nose pliers for holding small objects in tight spaces and locking pliers that will lock in place to hold or clamp objects together.