| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.18 |
| Score | 0% | 64% |
Which type of screwdriver has a straight slot in the top?
hex |
|
nut driver |
|
slotted |
|
phillips |
Screwdrivers come in many different handle, shaft, and tip configurations for use in a wide variety of applications. Screwdrivers are classified by their tip which is shaped to fit a corresponding screw head. Common tips are slotted (flat) and Phillips (x-shaped).
Which of the following types of saws would you use if you needed to cut the wood quickly and weren't concerned with leaving rough edges?
coping saw |
|
crosscut saw |
|
hacksaw |
|
rip saw |
Wood saws are categorized primarily by their teeth. Crosscut saws utilize knife-shaped teeth that cut across the grain of the wood while rip saws cut with the grain using chisel-shaped teeth that rip the wood cells apart as the cut is made. The kerf (slot) made by by a crosscut saw is much smoother than that made by a rip saw but a rip saw cuts much faster. Coping saws are a type of bow saw used to make detailed often curving cuts using replaceable blades with fine small teeth.
Which of the following saws would you use if you're cutting wood across the grain?
ripsaw |
|
crosscut saw |
|
hacksaw |
|
back saw |
Wood saws are categorized by their teeth shape and the number of teeth per inch (TPI). The higher the TPI of a saw the finer the cut it will make. Crosscut saws utilize knife-shaped teeth that cut across the grain of the wood while rip saws cut with the grain using chisel-shaped teeth that rip the wood cells apart as the cut is made. The kerf (slot) made by by a crosscut saw is much smoother than that made by a rip saw but a rip saw cuts much faster. Coping saws are a type of bow saw used to make detailed often curving cuts using replaceable blades with fine small teeth.
Which of the following is used in metal work for shaping metal?
mallet |
|
claw hammer |
|
ball peen hammer |
|
rivet hammer |
Ball peen hammers are most commonly used in automotive repair. They have rounded heads and are used to drive punches and chisels.
Which of the following saws would you use for creating a curved cut in wood?
back saw |
|
crosscut saw |
|
hacksaw |
|
coping saw |
Wood saws are categorized by their teeth shape and the number of teeth per inch (TPI). The higher the TPI of a saw the finer the cut it will make. Crosscut saws utilize knife-shaped teeth that cut across the grain of the wood while rip saws cut with the grain using chisel-shaped teeth that rip the wood cells apart as the cut is made. The kerf (slot) made by by a crosscut saw is much smoother than that made by a rip saw but a rip saw cuts much faster. Coping saws are a type of bow saw used to make detailed often curving cuts using replaceable blades with fine small teeth.