ASVAB Shop Information Practice Test 855814 Results

Your Results Global Average
Questions 5 5
Correct 0 3.18
Score 0% 64%

Review

1

Which of these saws is used with a miter box?

56% Answer Correctly

back saw

crosscut saw

hacksaw

rip saw


Solution

A miter box utlizes a back saw (a fine toothed saw with a rigid strip of steel opposite its blade edge) to make cuts in wood at a specified angle.


2

Which of the following would provide the most accurate measure of the diameter of a solid cylinder?

57% Answer Correctly

ruler

tape measure

outside micrometer

inside micrometer


Solution

Micrometers provide accuracy to the thousandths of an inch and come in outside and inside varieties. An outside micrometer is used to measure outside thickness, such as the diameter of a bolt, while an inside micrometer is used to measure the inside dimension of an object, such as the diameter of the hole of a nut or the width of a channel.


3

A joint created by welding is __________ the original metal.

70% Answer Correctly

as strong or slightly weaker than

harmful to

as strong or stronger than

weaker than


Solution

The joint created by welding is as strong or stronger than the original metal.


4

Which of the following nuts use a pin to lock the nut in place and prevent it from loosening?

45% Answer Correctly

slotted

wing

lock

cotter


Solution

Wrenches are used with threaded fasteners like bolts and nuts. A bolt has external threads while a nut has internal threads and this thread pattern combination allows them to lock together and act as fasteners. Nuts come in a variety of configurations including wing nuts which provide appendages that allow tightening and loosening by hand, slotted nuts that use a cotter pin to lock the nut in place and prevent it from loosening, and lock nuts that also prevent loosening via nylon in their threads. Threads are identified by pitch which is the number of threads per inch.


5

Screwdrivers are most broadly classified by their:

91% Answer Correctly

tip

torque

length

width


Solution

Screwdrivers come in many different handle, shaft, and tip configurations for use in a wide variety of applications. Screwdrivers are classified by their tip which is shaped to fit a corresponding screw head. Common tips are slotted (flat) and Phillips (x-shaped).