ASVAB Shop Information Practice Test 86443 Results

Your Results Global Average
Questions 5 5
Correct 0 2.96
Score 0% 59%

Review

1

What is a framing square used for?

66% Answer Correctly

marking lines at a right angle

measuring thickness and irregular shapes

ensuring that surfaces are level

measuring length around corners


Solution

Rulers are used to both measure distance and to draw straight lines. Tape measures are flexible rulers made from cloth or metal and are useful for measuring longer distances and in tighter spaces. Both rulers and tape measures provide similar accuracy, commonly down to \({1 \over 16}\) or \({1 \over 32}\) inch. A steel framing square is made up of a shorter ruler (tongue) and a longer ruler (blade) that meet at a 90° (right) angle. A framing square is often used by carpenters when framing stairs and roofs.


2

You are using a hacksaw to cut a Class 8 bolt. What is the most appropriate TPI for your saw blade?

49% Answer Correctly

18 TPI

8 TPI

10 TPI

2 TPI


Solution

A Class 8 bolt is made of very hard metal and larger TPI saw blades are most appropriate for very hard metals.


3

A __________ is driven by a motor and used to shape and form edge contours.

73% Answer Correctly

router

file

plane

chisel


Solution

A router is a tool that a worker uses to rout (hollow out), shape, or contour an area in relatively hard material like wood or plastic.


4

Which of the following determines whether a socket can be used with a particular ratchet?

49% Answer Correctly

the drive size

the socket size

the drive circumference

the point size


Solution

A ratchet (or socket wrench) is a wrench that applies torque in only one direction with a handle that can be moved back and forth without losing contact with the fastener. A ratchet uses variable attachments called sockets which come in a variety of drive sizes based on the size of the opening that attaches to the ratchet. Sockets with the same drive size will vary in the shape (six-point, twelve-point) and size of the nut opening that attaches to the fastener being tightened or loosened. Smaller point sized sockets are stronger and can apply greater torque while larger point sizes allow easier alignment.


5

You need to secure a piece of wood while you're drilling a hole. Which of the following would be the most appropriate tool to use?

57% Answer Correctly

clamp

pliers

vise

pincers


Solution

A vise is a clamp that is anchored to a work station and designed to hold material in place while it is being operated upon.