ASVAB Shop Information Practice Test 881206 Results

Your Results Global Average
Questions 5 5
Correct 0 2.92
Score 0% 58%

Review

1

Which of the following statements about solding is not true?

56% Answer Correctly

solder has a comparatively low melting point

soldering can only join metals

flux is used to clean surfaces before soldering

solder is an alloy of lead and tin


Solution

Soldering is a process by which two or more items (typically metal) are joined together by melting a filler metal (solder) into the joint. An electrically powered soldering iron or soldering gun is used to melt the solder which is an alloy of lead and tin that has a melting point below the melting point of the items being joined. A chemical cleaning agent called flux is also used to clean the surfaces before soldering.


2

Which of the following determines whether a socket can be used with a particular ratchet?

49% Answer Correctly

the socket size

the point size

the drive size

the drive circumference


Solution

A ratchet (or socket wrench) is a wrench that applies torque in only one direction with a handle that can be moved back and forth without losing contact with the fastener. A ratchet uses variable attachments called sockets which come in a variety of drive sizes based on the size of the opening that attaches to the ratchet. Sockets with the same drive size will vary in the shape (six-point, twelve-point) and size of the nut opening that attaches to the fastener being tightened or loosened. Smaller point sized sockets are stronger and can apply greater torque while larger point sizes allow easier alignment.


3

Which of the following types of saws would you use if you needed to cut the wood quickly and weren't concerned with leaving rough edges?

55% Answer Correctly

hacksaw

coping saw

rip saw

crosscut saw


Solution

Wood saws are categorized primarily by their teeth. Crosscut saws utilize knife-shaped teeth that cut across the grain of the wood while rip saws cut with the grain using chisel-shaped teeth that rip the wood cells apart as the cut is made. The kerf (slot) made by by a crosscut saw is much smoother than that made by a rip saw but a rip saw cuts much faster. Coping saws are a type of bow saw used to make detailed often curving cuts using replaceable blades with fine small teeth.


4

Which type of screwdriver has a x-shaped indentation on the head?

83% Answer Correctly

slotted

phillips

nut driver

hex


Solution

Screwdrivers come in many different handle, shaft, and tip configurations for use in a wide variety of applications. Screwdrivers are classified by their tip which is shaped to fit a corresponding screw head. Common tips are slotted (flat) and Phillips (x-shaped).


5

Which of the following saws would you use if you're cutting wood along the grain?

49% Answer Correctly

back saw

crosscut saw

ripsaw

hacksaw


Solution

The ripsaw delivers maximum efficiency at cutting with or along the grain (ripping).