ASVAB Shop Information Practice Test 911727 Results

Your Results Global Average
Questions 5 5
Correct 0 3.53
Score 0% 71%

Review

1

You're constructing a cabinet in your workshop and one of the cabinet doors is slightly too big. Which of the following tools would you use to make it fit?

63% Answer Correctly

chisel

file

drill

plane


Solution

In wooodworking, a plane is used to shave off a small amount of material to smooth a surface or make it fit properly. A jack plane is a general purpose plane that contains an adjustable depth blade set at an angle with a handle and knob to allow gripping when sliding the plane across wood.


2

You're replacing the hubcaps on a car. Which of the following are you most likely to use?

73% Answer Correctly

rubber mallet

ball-peen hammer

wooden mallet

claw hammer


Solution

A mallet is a hammer with a relatively large head, often made of rubber or wood. Both the size and material of the mallet head help prevent damage when striking more delicate surfaces.


3

Which of the following saws would you use if you're cutting wood across the grain?

61% Answer Correctly

crosscut saw

ripsaw

hacksaw

back saw


Solution

Wood saws are categorized by their teeth shape and the number of teeth per inch (TPI). The higher the TPI of a saw the finer the cut it will make. Crosscut saws utilize knife-shaped teeth that cut across the grain of the wood while rip saws cut with the grain using chisel-shaped teeth that rip the wood cells apart as the cut is made. The kerf (slot) made by by a crosscut saw is much smoother than that made by a rip saw but a rip saw cuts much faster. Coping saws are a type of bow saw used to make detailed often curving cuts using replaceable blades with fine small teeth.


4

This tool is a(n) __________.

66% Answer Correctly

punch

chisel

awl

screwdriver


Solution

A punch is narrow and is used to drive objects like nails (pin punch) or for making guide marks for drilling (center punch) or patterns in wood or metal.


5

Screwdrivers are most broadly classified by their:

91% Answer Correctly

length

torque

width

tip


Solution

Screwdrivers come in many different handle, shaft, and tip configurations for use in a wide variety of applications. Screwdrivers are classified by their tip which is shaped to fit a corresponding screw head. Common tips are slotted (flat) and Phillips (x-shaped).