ASVAB Shop Information Practice Test 942494 Results

Your Results Global Average
Questions 5 5
Correct 0 3.04
Score 0% 61%

Review

1

Which of the following nuts prevent loosening via nylon in their threads?

63% Answer Correctly

slotted

cotter

wing

lock


Solution

Wrenches are used with threaded fasteners like bolts and nuts. A bolt has external threads while a nut has internal threads and this thread pattern combination allows them to lock together and act as fasteners. Nuts come in a variety of configurations including wing nuts which provide appendages that allow tightening and loosening by hand, slotted nuts that use a cotter pin to lock the nut in place and prevent it from loosening, and lock nuts that also prevent loosening via nylon in their threads. Threads are identified by pitch which is the number of threads per inch.


2

Which of the following nuts provide appendages that allow tightening and loosening by hand?

72% Answer Correctly

wing

lock

cotter

slotted


Solution

Wrenches are used with threaded fasteners like bolts and nuts. A bolt has external threads while a nut has internal threads and this thread pattern combination allows them to lock together and act as fasteners. Nuts come in a variety of configurations including wing nuts which provide appendages that allow tightening and loosening by hand, slotted nuts that use a cotter pin to lock the nut in place and prevent it from loosening, and lock nuts that also prevent loosening via nylon in their threads. Threads are identified by pitch which is the number of threads per inch.


3

You are using a hacksaw to cut a Class 8 bolt. What is the most appropriate TPI for your saw blade?

49% Answer Correctly

8 TPI

10 TPI

18 TPI

2 TPI


Solution

A Class 8 bolt is made of very hard metal and larger TPI saw blades are most appropriate for very hard metals.


4

This tool is a(n) __________.

57% Answer Correctly

inside micrometer

vernier caliper

inside caliper

outside caliper


Solution

Calipers are similar to micrometers in shape but instead of measuring distances, calipers are used to transfer distances between objects. An outside caliper is used to transfer outside dimensions while an inside caliper is used to transfer inside distances. A vernier caliper is an extremely precise caliper (down to \({1 \over 1000}\) inch) that allows measuring / transferring either inside or outside dimensions.


5

When cutting hard metals with a hacksaw you should choose a blade with __________ teeth per inch (TPI).

63% Answer Correctly

odd

low

high

even


Solution

Blades with more and smaller teeth (high TPI) cut harder metals more effectively while blades with fewer and larger teeth (low TPI) cut softer metals more effectively.